o
peRaTion
30
BA_v2_colibri_ccTalk_EN_1-0
If all coins are to be accepted for payment on the machine, DIL switches S1.1‑8 and S2.1‑8 on
both switch blocks are in the bottom position (set to OFF). If you want to inhibit a coin channel,
you only need to set the associated DIL switch upwards to ON.
Example
The coin validator is not to use coin channels 3 and 10 for acceptance any more so that coin channels 3 and 10 must
be inhibited.
With this setting, coin channels 3 and 10 are no longer used!
If one normal and one narrow coin channel are programmed for a coin type on
the coin validator, you must inhibit the normal coin channel as described above
to activate the narrow coin channel. If both channels are activated, the wider
acceptance band of the normal coin channel is used. If you intend to inhibit the
coin type, you must also inhibit both coin channels.
To inhibit coin channels on the coin validator:
1
Unhook the coin validator from the machine.
2
Use DIL switches S1.1-8 and S2.1-8 to inhibit the desired coin channels (see the example above).
The desired coin channels are inhibited.
3
Remount coin validator in the machine.
