CPI V2 COLIBRI 36B Series, Operating Instructions Manual

Page: 25 / 48

s
TaRT
-
up
BA_v2_colibri_ccTalk_EN_1-0
25
6.2 Mounting the 3-fold sorter s
2
SSD-3000 ...
If you want to operate the v
2
colibri with the s
2
SSD‑3000 sorter, you mount it on the top or front
entry version using a special bracket:
6.2.1 ... on the v
2
colibri top entry version
There are three different versions of the NRI 3-fold sorter for the top entry version of the v 2 colibri
depending on the machine environment. They differ by virtue of the position of the return chute:
• s
2
SSD-3001: Return chute in front of the right-hand sorting chute
• s
2
SSD-3002: Return chute next to the right-hand sorting chute
• s
2
SSD-3003: Return chute behind the right-hand sorting chute
Mounting the sorter will be explained using the s
2
SSD-3002 as an example:
1
Fasten the mounting frame [ Fig. 10 / 1 ] using the three screws [ Fig. 10 / 2 ] on the back of
the sorter [
Fig. 10
/
3
].
Depending on the machine environment, three different heights are possible.
2
Connect the sorter [
Fig. 10
/
3
] to the coin validator by means of the 10-pin sorting con-
nector [
Fig. 10
/ 4 ] on the back of the sorter and of the coin validator with the help of the
associated sorting cable.
3
Suspend the coin validator on its mounting studs [
Fig. 10
/
5
] in the mounting frame [
Fig. 10
/
1
]:
insert it first at the bottom then press it in at the top until it snaps in.
4
Connect the coin validator to the machine
(cf. Chap. 6.1 Installing the coin validator in the machine, p. 24)
.