a
bouT
...
10
BA_v2_colibri_ccTalk_EN_1-0
•
Options
–
Top or front entry version
–
MINI or MIDI front plate
–
SSD-3000 3-fold standard sorter or HSD-3000 3-fold high-speed sorter
–
Licence for updating the complete ccTalk coin and device configuration on machines
with PC-based control (remote data block upload)
–
ACMI write protection
–
Additional tamper protection by protocol encryption: BNV (Bill Note Validator
encryption), DES (Data Encryption Standard)
2.2.2
Models and operating modes
There are different versions of the v
2
colibri available. They mainly differ
•
in the coin entry and return area
•
in the communication protocol and
•
in the acceptance speed.
2.2.2.1
Coin entry and return area
•
Top entry and return at the bottom right (3
6
Bxx. ..)
You insert the coin from the top into the device and it is returned via the return at the bottom
right should it not be accepted
(cf. Chap. 4.2 Coin path, p. 15)
.
•
Top entry and return at the bottom left (3
1
Bxx. ..)
You insert the coin from the top into the device and it is returned via the return at the bottom
left should it not be accepted
(cf. Chap. 4.2 Coin path, p. 15)
.
•
Front entry and front return (3
9
Bxx. ..)
You insert the coin from the side into the device and it is also returned at the side should it not
be accepted
(cf. Chap. 4.2 Coin path, p. 15)
. On this coin validator, you can push on the optional
NRI MINI or MIDI front plates on the left-hand side of the device
(cf. Chap. 10.3 Accessories, p. 44)
2.2.2.2
Communication protocol
The coin validator communicates with the machine controller via the serial ccTalk protocol.
The coin validator works as slave and the machine as master. The ccTalk protocol is open for
everybody and can be used without restrictions. Another advantage is remote uploading, i.e.
it is possible to load complete coin and machine configurations into the coin validator via the
ccTalk interface from a host computer too. Two versions are possible:
•
Standard
Protocol according to ccTalk specification.
•
ACMI
The factory programming of the coin validator in this model meets all requirements of
the Italian gaming machine act "legge 289 – comma 6" passed in July 2003. The ACMI
version of the v
2
colibri is write-protected so that it is not possible to change the factory
programming using configuration tools.
In order to meet the requirements of the Italian gaming machine act subsequent
configuration of the ccTalk ACMI model is impossible. If you want to change the
factory settings please contact our sales representative.
