background image

LIMITED WARRANTY INFORMATION

 

 

EXTRAORDINARY MAINTENANCE 

This maintenance must be carried out only by a qualified technician. 

Extraordinary maintenance is a rare occurrence and consists essentially of replacement.of one of the following items: 



 

a damaged component 



 

a damaged electric cable (scratched, or compressed) 

ORDINARY MAINT

E

NANCE 

To perform any maintenance on STEMSHINE PRO™ -GP5  glass polisher, the  machine must be turned off and disconnected from the 
socket. The appropriate tooling must be used together  with individual protection, according to the applicable laws. 

Ordinary maintenance consists of cleaning the glass polisher on a regular basis with detergents; vacuuming the interior chamber of the 
machine to remove lint and dust; and replacing the brushes on an annual basis.  

DO NOT IMMERSE THE MACHINE IN WATER. 

The 

control panel is particularly sensitive to humidity: if it gets inside the panel, it can short circuit the electronics. 

The electric cable must be checked meticulously at least once a week, using an extra lamp, to make sure that it has no scratches (even 
small ones) and does not present irregularities. 
 

 

If maintenance must be carried out in a poorly lit 

area, always employ an extra lamp to ensure that 

the work is executed under safe conditions ac-

cording to local law requirements 

 

 

CARE and MAINTENANCE INSTRUCTIONS — continued 

CAMPUS PRODUCTS (CPI) provides a 1 year Limited Warranty from the date of purchase.  This warranty colvers defects in materials and work-
manship (excluding the polishing brushes)  In the unlikely event that you experience problems with your STEMSHINE PRO™ -GP5 Glass Polish-
er, please call our office at 866-912-3469.  You will need the Serial Number along with a description of the problem.  CPI will then assist you in 
either correcting the problem or directing you to the Authorized Service Center nearest you. 

This warranty DOES NOT cover any accidental damage, damages caused by abuse or misuse; damages caused by using the machine for pur-
poses other than what it was designed and intended for. 

Our warranty is limited ONLY to the cost of repairing or replacing the warranted equipment, at Campus Products sole discretion. 

OR 
SCAN  

To be sure your unit is properly registered and your war-
ranty is in full force and effect PLEASE be sure to register 
your new machine on our web site at www.cpishine.com ; 
click on the “WARRANTY” tab.  

Upon receipt of your registration, a discount coupon will 
be sent via email.   

Summary of Contents for STEMSHINE PRO - GP5













Reviews: