![background image](http://html1.mh-extra.com/html/cpi/0102324500rr/0102324500rr_manual_2674993105.webp)
CHPA
S
ERIES
D
OC
.01023245
R
EV
.R
THIS
DOCUMENT
IS
THE
PROPERTY
OF
COMMUNICATIONS
&
POWER
INDUSTRIES.
REPRODUCTION
OR
RELEASE
WITHOUT
EXPRESS
PERMISSION
IS
STRICTLY
PROHIBITED
B-17
B.13.2 Factory Authorized Access Code (FAAC)
Entry of the Factory Authorized Access Code provides entry to the Factory Authorized Access
Mode (FAAM). Upon entering the FAAC and pressing the FUNCTION button, the CHPA will
be in FAAM. This mode provides unlimited read/write access to all data (fault trip points,
special test modes, etc.) until prime power is cycled or the code is reentered.
FAAM is available only through the Local panel. To provide a visual indication that the unit is
in FAAM, the Regulator Bypass LED will flash to indicate which control point(s) are in FAAM.
FAAC entry appears as follows:
L O C A L 6 : 1 1 P
S T A N D B Y
F A A C :
The FAAC is 050401.
To warn the unwary user, the following flashing message (alternating between 37 percent and
100 percent illumination) appears upon entering the FAAM:
F A C T O R Y A U T H M O D E
U S E O F T H I S M O D E C A N
C A U S E H P A D A M A G E
H I T M E N U T O E X I T
To continue, press the FUNCTION button. The Factory Authorized Quick Access Codes (50-99)
will be valid for data entry until prime power is cycled or the FAAC is reentered. If any other
key is pressed, the front panel will cycle to the next non-Factory Authorized mode category:
User Tests. Otherwise, the control panel will display the next Menu category: Fault Trip Setting.
B.13.3 Fault Trip Setting
(This category will appear only during FAAM.)
This category will include all non-RF fault trip settings. Unlike other categories, the legend
listed below will appear on Line 2, the fault name will appear on Line 3, and the numerical
entry will appear on Line 4. Press the FUNCTION button to scroll through the available faults.
Fault names will appear on Line 3 and the numerical entry will appear on Line 4. See Table 4-1
for fault trip settings.
F A U L T T R I P S E T T I N G S
T