CPAT FLEX DRV3, User Manual

Page: 6 / 44

CPAT FLEX (DRV3)
6
NOTE
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and if it is not
installed and used in accordance with the instruction manual, it may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
NOTE
Any modifications made to this device that are not approved by Effigis Geo-
Solutions Inc., may void the authority granted to the user by the FCC to operate
this equipment.
IC ICES-003 Class A Notice - Avis NMB-003 Classe A
This Class A digital apparatus complies with Canadian ICES-003.
1.4 Technical Support
Effigis Technical Support Service is available from Monday through Friday from 9:00 AM to
5:00 PM Eastern Time.
Toll free from U.S. and Canada: + 1-888-495-6577
International: + 1-514-495-0018
Fax questions anytime to: + 1-514-495-4191
cpat@effigis.com
1.5 Calibration
Your DRV3 unit has been calibrated and tested in the factory, and does not need further
calibration before use.
However, if the unit suffers damage or is repaired, it is recommended that the unit be
calibrated by an authorized Effigis service center.
As well, if your company requires regular calibration of all equipment, or requires a calibration
certificate for the DRV3, a calibration service is available through Effigis.
For more information on calibration services, please contact your Effigis representative.