CPAT FLEX DRV3, User Manual

Page: 29 / 44

effigis.com
29
User Manual
ON Remains on (lit)
AUTO 10s Turns off after 10 seconds if no keys are pressed
AUTO 30s Turns off after 30 seconds if no keys are pressed
AUTO 60s Turns off after 60 seconds if no keys are pressed
OFF No backlight
3. Press Enter ( ↵ ) to save your choice.
4. Press
Esc
until you return to measurement mode, or press the left arrow ( ) to return to
the settings menu and continue configuring other parameters.
3.2.14 Setting up Contrast
This parameter controls the screen contrast on the DRV3’s display.
To adjust the contrast:
1. In the settings menu (page 5), select Contrast. The current setting is displayed to the right.
2. Press the right arrow to move to the options and use the up and down arrows to select the
contrast value from 0 (least contrast) to 9 (highest contrast).
3. Press Enter ( ↵ ) to save your choice.
4. Press Esc until you return to measurement mode, or press the left arrow ( ) to return to
the settings menu and continue configuring other parameters.
3.2.15 Displaying the DRV3’s Internal Temperature
This menu item provides a view-only access to the DRV3’s temperature.
To view the unit’s internal temperature, go to the settings menu (page 5). The current
temperature is displayed to the right, in Celsius (C) and in Fahrenheit (F).
Press
Esc until you return to measurement mode, or press the left arrow ( ) to return to the
settings menu to configure or view other parameters.
3.2.16 Setting stand-by mode delay
While undocked and unplugged, the DRV3 can enter into a low consumption state to preserve
battery life if no buttons have been pressed for a certain delay. This delay can be set to 1
min, 5 min or disabled.
1. In the settings menu (page 5), select Stand-by. The current setting is displayed to the right.
2. Press the right arrow to move to the options and use the up and down arrows to select
the wanted value.
3. Press
Enter
( ↵ ) to save your choice.