CP Plus CP-UNR-1xxQ1 Series, User Manual

Page: 109 / 189

101
Figure 5-76
5.7.2 HDD Management
Here is for you to view and implement hard disk management. See Figure 5-77.
You can see current HDD type, status, capacity and record time. When HDD is working properly,
system is shown as O. When HDD error occurred, system is shown as X.

Alarm set: Click alarm set button, the interface is shown as below. See Figure 5-78. (This
interface is just like the abnormality setup). Please refer to chapter 5.7.3 for detailed
information.

HDD operation: You can select HDD mode from the dropdown list such as read-only or you
can erase all data in the HDD. Please note system needs to reboot to get all the modification
activated.
Figure 5-77
Figure 5-78
For the HDD group setup operation, please note:

Each channel
’s records can be stored into the specified HDD Group.

Each HDD Group is corresponding to several hard disks, while one hard disk is only
included in one HDD Group.