CP Plus CP-UNR-1xxQ1 Series, User Manual

Page: 44 / 189

36
Port Name Connector Function
NC5
3:port NO3
～
C3, Group 4
：
port NO4
～
C4,
Group 5: port NO5, C5, NC5).Output alarm
signal to the alarm device. Please make sure
there is power to the external alarm device.

NO: Normal open alarm output port.

C: Alarm output public end.

NC: Normal close alarm output port.
A RS485
（
RS-485
）
communication
port
RS485_A port. It is the cable A. You can connect
to the control devices such as speed dome PTZ.
B RS485_B.It is the cable B. You can connect to
the control devices such as speed dome PTZ.
CTRL 12V / / Controller 12V power output. It is to control the
on-off alarm relay output. It can be used to control
the device alarm output. At the same time, it can
also be used as the power input source of some
devices such as the alarm detector.
+12V / / +12V power output port. It can provide the power
to some peripheral devices such as the camera
or the alarm device. Please note the supplying
power shall be below 1A.
Network port / 10M/100M/1000M self-adaptive Ethernet ports.
Connect to the network cable.
eSATA eSATA port /
External SATA port. It can connect to the device
of the SATA port. Please jump the HDD when
there is peripheral connected HDD.
USB2.0 port /
Connect to USB mouse.
RS232
（
RS-422
）
RS232 debug
COM. It is for general COM debug to configure IP
address or transfer transparent COM data.
HDMI
High Definition
Media Interface High definition audio and video signal output port.
It transmits uncompressed high definition video
and multiple-channel data to the HDMI port of the
display device.
VGA
VGA video output
port VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.