5
6
3. CASAMBI USER APP
Within the Casambi system, CP Electronics sensors are configured as
’luminaires with sensors’.
Only light fixtures are shown in the app and sensors are built as control properties. Sensors are
therefore,
not displayed in the gallery tab (used as the floor plan display in the app).
3.1. [LUMINAIRES] TAB
Controls are generally accessed in the ‘luminaires’ Tab.
HERE ARE THE BASIC GESTURES TO CONTROL
LIGHTS:
To turn off or on a luminaire just tap the luminaire.
Or
PRESS and HOLD to bring out the controls.
Pan the luminaire control left or right to adjust the
light level of the luminaire. The app will remember the last light level, so when you turn the light
on again it will return to the previous level. Pan the lamp control up or down to adjust the colour
temperature of the luminaire.
3.1.1. [GROUPS]
Note that groups are predominantly designed for manual operation using the app, and scenes
MUST be used for automation such as occupancy and daylight control.
3.2. [GALLERY TAB]
The gallery tab merely offers a way to display where the lighting fixtures are for operation testing
and showing their status. This step is not a necessity for lighting controls to be performed.