Implementation
Programming Steps on the Casambi app:
1. Discover nearby devices and add to desired network name as e.g. Regents Floor 1
a. Choose to use the
[Evolution] network for the
latest features.
2. Create the occupancy ON scene for occupancy control:
a. Tap the
[Scenes] tab and then [Edit]
b. Tap
[+] at the top left to add a scene. Enter scene
name e.g. ’All On + Daylight’ and choose the group
or all the luminaires to be controlled within this
scene.
c. Press and hold each luminaire to get the slider to
the set it for example, dim=50% brightness level,
and switched output=ON.
d. Tap
[Done] to finish the settings for the scene.
3. Refer to the Appendix 1 and set all the parameters
under different menus to the
CP Electronics Initial Setup
values.
4. Select
[Use Control hierarchy] to allow occupancy
control:
a. Tap
15 16
Function
Implementation
Occupancy
(presence)
with
daylight
dimming
and
switching
Occupancy: switches ON/OFF
both dim row channel and inner
row switched output channel.
Daylight: control should dim
based on available daylight.
Should there be enough ambient
daylight, it may dim to 0% and
turn off the non-dimmable lights
also.
Occupancy settings:
Mode = Presence / Absence
ON Scene = Switched out : ON,
Dim out : 50%
OFF scene = Switched out : OFF
Dim Out : 0%
Daylight control settings:
Mode = closed loop
Desired Level = 500 lux
Set Daylight min dim = 0%
Alternative
daylight dim
to minimum
(e.g. 3%)
Daylight should dim to min
(e.g.3%) and keep the switched
output channel ON.
As above but set:
Daylight min dim = 3%