3.4. MORE MENU […]
All other control functions can be found under the […] More menu at the
bottom right.
Timer, sensor and switch control can be accessed here.
Also, use the
[Network setting] option to activate the [Control
hierarchy] to allow occupancy control.
3.5. ACTIVATE [USE CONTROL HIERARCHY] FOR OCCUPANCY CONTROL
The
[Use control hierarchy] option MUST be activated in order to configure for occupancy
control.
At the bottom right under:
Choose
[Network Setup], then [Control options] which opens the
screen shown to the right then: slide right
[Use control hierarchy]
to switch to ON. An
@
button will appear in the lower left of the page
which when tapped will allow the end-user to manually resume
network automation when needed.
3.6. PICK SENSOR FOR OCCUPANCY CONTROL
Tap
Here, choose
[Sensors] and select an occupancy sensor for the control group.
Then select the control mode and ON/OFF scenes:
a) Presence (need to set only the ON scene, the OFF scene will only be OFF so no need to
specify the scene)
b)
Presence / Absence (need to set the ON and OFF scenes)
c) Absence only (need to set the OFF scene only)
d) Set the linger time. This is the time-out period.
e) Set the fade time. This is the time takes to dim and fade to 0% (OFF).
9 10