7. Daylight Setting for ‘dim row’ only:
a. Go to
[SCENES], tap [Edit] at the top right, then the ’dim row” scene to edit.
b. Touch the
[SETTINGS] tab at the bottom right to open to choose daylight control
c. Choose
Closed loop for a maintained illuminance method
i. Apply a
Desired Illuminance level of 250 Lux for example
8. Test for absence occupancy operation:
a. Tap the
[Luminaire] tab, then tap [@] at bottom left to resume automatic control.
b. Operate the EnOcean switch button 1 to turn on all the lights which will also be daylight
controlled.
c. Operate button 2 to toggle the switched output and turn on/off the white board row of
lights.
d. Cover the sensor for >20 seconds for the sensor to time-out and see the lights operate to
the assigned OFF scene.
9. Daylight occupancy operation testing:
a. Operate button 1 so all the lights are turned on. Present movement to keep the sensor
activated.
b. Read the Lux level read back from the sensor and see that it reaches close to that of the
desired Lux target value.
Assign each button to their designed scenes
Button 2 to control switch out element only
Use toggle so the switch out element for
the whiteboard row can be toggled on/off
19 20