Topside Control Panel
16
16
IMPORTANT.
Before performing any service on the spa, contact your local Factory Authorized
Dealer. Make a visual inspection of the spa to get an understanding of what condition it may be in
and if anything looks out of the ordinary. If any part appears to be damaged, loose or missing, do not
proceed. Contact your Factory Authorized Dealer immediately.
Your spa control has been specifically designed so that by simply connecting the spa to its properly
grounded source, and following the start-up procedures in this manual, the spa will automatically
heat to the set temperature. You can adjust the set temperature by pressing the up or down arrows on
your control panel to the desired temperature. When your spa is heating the heat indicator on your
control panel will be on.
102
Power-up Detection
After a power-up, on the first 10 seconds the display will alternate between the software number and
revision, the display will then blink until somebody presses a key. This feature is to let the user know
that a power failure has occurred.
Temperature displayed in Fahrenheit or Celsius
Press and hold the Light Key for 5 seconds to toggle between Fahrenheit and Celsius.
Pump 1
LED
Pump 2
LED
Blower
LED
Light
LED
Filter Cycle
LED
Heater
LED
Pump 1
Button
Pump 2
Button
Blower
Button
Light
Button
Filter Cycle
Button
Down
Button
Up
Button
Error
Message
Lights