Coway CHP-01AL, Manual

Page: 52 / 64

Contents
Important Installation Recommendations
Electricity Safety
Installation Safety
Tools and Materials Required for Installation
How to Install
Filter Flushing Method
Read All Instructions Before Installation
For your safety, the information in this manual must be followed to
minimize the risk of property damage or personal injury.
Innowave strongly recommended that any installation, filter replacement, and repair be
performed by a qualified man or an educated service man because system or electronic
components could cause danger.
INSTALLER RESPONSIBILITY :
The water supply valve (page 3 and 5) is included for use in
areas where codes permit. Installer must comply with state and/or local codes. If not, the installer
must provide fittings to tap the cold water pipe for a feed water source to Innowave’s water
filtration system (must adapt to 1/4
〃
tubing).
This installation manual includes the contents from installation and product use. Do not use any
kinds of filters and components made by other companies to avoid a product damage not
covered by Innowave.
Important Installation Recommendations
Shall check the voltage rating, before installation.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
Do not use power for industrial use. Only connect the power cord to power for home
appliance use.
Before any service and repair, shall turn off main power to avoid personal injury from
electric shock.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
After installation the power supply cord and plug shall be accessible.
Electricity Safety
Appendix : Installation Manual
ⅰ
ⅰ
ⅰ
ⅱ
ⅲ
ⅳ
ⅶ