Coway CHP-01AL, Manual

Page: 35 / 64

34
Caution to be Taken at Assemble
and Disassemble
Be careful any component not to be damaged or deteriorated in the
assembling and disassembling to prevent from any property damage or
personal injury.
Do all the switches operate normally?
Is the filtration normal after assembling?
Are the screws, components, and wires on original position?
Should assemble them on the original positions after A/S.
The wires are positioned away from sharp edge, heat source,
and movable equipment.
Some electric components are insulated for the safety.
Let the wirings of the
electric component be
on the original
position.
The wires and binders are kinds of safety device.
Is there any water leakage?
Check up after A/S.
Before disassemble.
Drain completely the water in the storage tank.
It causes decreasing the insulation efficiency of component
whose the insulators are wet.
Plug out the power cord.
Plug out the power cord to prevent any electric shock.
Cut off feed water.
Close the main water valve to cut off the feed water in
A/S check up.
Caution Case