EN
Clean the product body
03 Maintenance
CAUTION
How to separate the nozzle duct
- Separate the nozzle duct in the vertical direction as shown
in the figure.
- When separating the duct, make sure not to drop it in the toilet.
CAUTION
How to separate the dry duct
- As shown on the figure, separate the drying duct in the
arrow direction.
Use a soft cloth or sponge with a neutral detergent
to clean the bidet.
Failure to do so may result in product deformation or damage.
Disconnect the power plug from the electrical outlet when
removing and cleaning the nozzle/drying duct.
The nozzle/drying duct can be washed with water, but it
must be completely dried before reassembling.
The product body and the touch sensor controller should
never be cleaned with water.
NOTE
Do not use a thinner, benzene, detergents with abrasives, or rough scrubbers on the product.
Do not use alkaline or acid detergent, it may cause discoloration or corrosion.
Make sure to follow the above instructions as, unlike other surfaces, the sea is highly susceptible to
scratches and rough scrubbers can scratch or peel the surface.
Do not apply excessive force when cleaning the nozzle as it may break.
Our company is not responsible for defect caused by the customer disassembling and repairing the
product on his/her own. Please contact the service center when a product malfunction or defect occurs.
35
