EN
02 HOW TO USE
[Care mode]
This is a sensitive cleansing mode used when the
conditions of the anal region are not good and require
the soft and delicate cleansing
While sitting on the seat, press the ‘Mode’ button on the
remote controller to switch to the care mode. When the
mode is changed, the care LED is lit. After changing the
mode, press the ‘Spray’ button to start cleansing.
*Youcanchangemodesevenafterstartingtocleansing.
- Before the cleansing water is sprayed, the cleaning nozzle
removes cold water so that cleansing is done at the set
warm water temperature.
- The cleansing water is sprayed for about 1 minute, and it
stops automatically.
- A program course operates that is optimized and designed
for poor conditions of the anal region.
Basic operation guide for cleansing
✽ Press the ‘Move Nozzle’
button to adjust its position.
✽ Press the ‘Spray’ button again during operation to run additional cleansing.
✽ During use, it is possible to adjust the warm water temperature, water pressure and nozzle position
according to the body type and preference.
✽ When the nozzle returns to the position after cleansing, it is cleaned automatically for about
6 seconds.
23
