EN
Press and hold the ‘Power’ button and ‘Spray’ button at
the same time for about 2 seconds on the control panel.
All the LEDs on the control panel turn off and the
equipment enters the Special mode.
* If no button is pressed for more than about 10 seconds, the special
mode is disabled.
1
Sound mode
After entering the special mode, press the ‘Power’
button the control panel to select a sound mode.
- When the mode is enabled: The LED turns on.
- When the mode is disabled: The LED turns off.
2
Sitting detection mode
After entering the special mode, press the ‘Spray’
button the control panel to select a sitting
detection mode.
- When the mode is enabled: The LED turns on.
- When the mode is disabled: The LED turns off.
How to set special modes
3
Automatic drainage mode
After entering the special mode, press the ‘Nozzle
Clean’ button the control panel to select a
automatic drainage mode.
- When the mode is enabled: The LED turns on.
- When the mode is disabled: The LED turns off.
13
