Coway BAS25-AMY, Manual

Page: 15 / 36

14
13
8
12 11
Child function button
This function is specifically designed for children
whose skin is more sensitive than adults. Press
the button and cleansing will occur for 1 minute
and drying for 2 minutes. The nozzle will position
according to the size of the user and low water
pressure will be used.
*
The child function operates regardless of the seat sen-
sor detecting a human body.
*
Move, water pressure, seat temperature, warm water/drying tem-
perature functions can be adjusted while using the child function.
Press the Child function button again while using the cleansing
or drying functions for an additional cleansing or drying function.
15
AIR+ button
Air+ function adds air to the water spray to
increase the cleansing ability. Press the Air+
button for a more powerful and efficient
cleansing.
Cleansing water / dryer temperature
adjustment button
Press the button to control warm water/drying
temperatures. When the Warm Water/Drying
Temperature Adjustment button is being pressed,
the LED changes to following the levels: Low (Green)
→
Medium (Orange)
→
High (Red)
→
Off.
*
While on standby or when front/rear cleansing function is
activated, the indicator displays the warm water temperature
adjustments. While the dry function is activated, the indicator
displays the drying temperature adjustments.
9
GREENPLUG button
Press the button to activate the GREENPLUG mode.
Non-power saving mode
↔
GREENPLUG mode
- Press and hold the GREENPLUG button on the remote control for 2 seconds, there will be a "beep" sound and the green LED of the
GREENPLUG function will turn ON (GREENPLUG)
GREENPLUG mode
↔
General power saving mode
- Press and hold the GREENPLUG button on the remote control for 2 seconds, there will be a "beep" sound and the orange LED of the
GREENPLUG function will turn ON (General power saving mode)
General power saving mode
↔
Non-power saving mode
- Press and hold the GREENPLUG button on the remote control for 2 seconds, there will be a "beep" sound and the green LED of the
GREENPLUG function will turn off (Non-power saving mode)
*
The GREENPLUG is initially set as activated.
10
13
Nozzle Adjustment button
Press the button to move the nozzle back or forth
while cleansing/bidet cleansing function is in
operation. The nozzle position can be adjusted in
5 levels.
7
Nozzle Cleansing/Cleaning function
button
Nozzle Cleansing: Press the button while the
product is turned on and the nozzle will be
cleansed for 10 seconds.
Nozzle Cleaning: Press the button while the prod-
uct is turned off and the cleansing/bidet nozzles
will protrude consecutively and self-clean for a
total of 3 minutes.
Seat Temperature Adjustment button
Press the button to adjust the temperature of the
seat.
When the Seat Temperature Adjustment button
is pressed, the LED changes according to the
temperature of the seat: Low (Green)
→
Medium
(Orange)
→
High (Red)
→
Off.
14
Sterilisation button
Press the button to activate the automatic
sterilisation function. LED changes between two
levels: Hose sterilisation (20 seconds)
→ Nozzle
sterilisation 2 (15 seconds).
* Automatic sterilisation: Based on 12 bidet uses a day, 1
automatic sterilisation occurs.
*
Manual sterilisation: Recommended use is twice a day.
*
Level 2 automatic sterilisation is activated when the seat
sensor does not detect a human body.
*
Manual sterilisation function is not activated when cleansing/
bidet/child/drying functions are in operation. If the button is
pressed once more while the sterilisation function is in opera-
tion, there will be a " beep " sound and sterilisation will end.
Water Pressure Adjustment button
Water pressure can be adjusted in 5 levels. The
selected water pressure indicator will light up
each time when the button is being pressed.
H
ow t
o U
se
BUT
TONS
AND
DISPL
AY
P
ANEL