Coway BAS25-AMY, Manual

Page: 11 / 36

10
9
How to connect with the remote control (pairing)
1. Plug in the bidet, then press and hold the Cleansing button
together with the Nozzle Cleaning button for 2 seconds. There
will be a "beep" sound and the LED indicator will blink to show
that the pairing mode is being accessed.
2. Within 15 seconds of entering the pairing mode, press and hold
the Cleansing button on the remote control for more than 5
seconds to pair with the product.
3. The LED indicator (WIDE, Warm water/Drying temperature, Seat
temperature, GREENPLUG) of the remote control will blink 3 times
in orange, after which the pairing process in complete.
(Wait for approximately 15 seconds after the pairing process
completed.)
*
You will be automatically directed out of the pairing mode with a beeping sound after
15 seconds, regardless of whether pairing is complete or not.
(You have to complete pairing within 15 seconds or try again.)
 How to pair the remote control with the product
Pairing is creating a wireless connection between the controller of the remote control
and the bidet.
Follow the instructions below to correctly pair the remote control with the bidet.
H
ow t
o U
se
IMPOR
TANT
!