Coway BAS25-AMY, Manual

Page: 21 / 36

20
19
Remove existing toilet seat
Install product
1
2
Remove the anchor nuts to detach the existing toilet seat (
①
) and
the cover (
②
).
* Store the removed toilet seat and cover away from direct sunlight.
1
2
1. Close the main water supply valve (
①
) then remove the existing
water tank hose (
②
).
2. Apply rubber cone washers, the T-shaped connector and the
water tank hose in order to the existing water pipes. Connect
the bidet hose to the T-shaped connector.
* Rubber cone washers must be inserted into every T-shaped connector.
* Fully tighten the nuts at the top and bottom of the T-shaped connector in a
clockwise direction.
3. Fix the MF filter onto the filter fixing stopper in the direction as
shown in the image.
* Take caution as the bidet may not function properly if the filter is loose.
M
ain
tenanc
e
INST
ALL
ATION