Coway BAS25-AMY, Manual

Page: 19 / 36

For child function (cleansing)
 Child function
Sit down and press the Child button on the remote control.
There will be a beep sound and the child function will be activated.
- You can adjust the water pressure, water temperature, warm air and nozzle position
according to the child's preference.
[Water pressure: Level 1 (Soft spray), Warm water temperature: Level 2 (Warm water),
Nozzle position: Level 5 (Maximum), WIDE Level 1 (Wide and soft spray)
- Cleansing water will be sprayed for 1 minute then will switch automatically to the dry function.
[Drying temperature: Level 2 (Warm air)]
- The nozzle retracts after cleansing and will be automatically cleaned for approximately
6 seconds.
* Press the Move button to adjust the position of the nozzle.
* You can adjust the warm water temperature, water pressure and nozzle position
according to your preference.
* Press the Child button again while in operation for an additional minute of cleansing.
 Move
Sit down and press the Move button on the remote control.
- The nozzle moves back and forth to cover a wide area.
* This continues while the cleansing function is being used.
* Press the Move button to adjust the position of the nozzle.
* Press the Move button again to stop the nozzle.

Dry
Automatically activated when cleansing is completed.
- Warm air is emitted for 2 minutes to dry the wet areas.
* Wipe the wet area lightly before using dry feature to speed up drying.
* Press the Warm Water/Air Temperature button to adjust air temperature.
* Press the Child button again during use to add an additional 2 minutes of
drying.
 Stop
Press this button to stop all currently operating functions.
- All current operating functions stop.
* The dry function stops 2 seconds after the Stop button is being pressed.
18
17
H
ow t
o U
se
CHOOSING
THE
DESIRED
CLEANSING