Table of Contents
Kangaroo™ Joey Enteral Feed and Flush Pump with Pole Clamp
13
Selecting EZ Pump Mode
EZ PUMP MODE
may be selected through the
Biotech Options
button which may be accessed on
the Biotech screen (see page 20). The
EZ PUMP MODE
setting will be stored in the machine pump
memory and saved when the unit is shut off.
Note:
If the user inserts a feed/flush set while the
EZ PUMP MODE
is enabled,
EZ PUMP
MODE
will be cancelled and the unit will immediately revert back to the normal mode. If
EZ
PUMP MODE
is desired, the user must then re-enable
EZ PUMP MODE
through the
Biotech
Options
screen.
When enabled and not in
CERTIFICATION MODE
, a small
EZ
icon will be visible on the bottom
of the screen near the battery icon. However, it will not appear in the
POWER DOWN
,
SYSTEM
ERROR
, or
LOW BATTERY SCREENS
.
Selecting Continuous or Intermittent Feed Mode
The Kangaroo Joey enteral feed and flush pump with pole clamp can be programmed to feed continuously or intermittently.
The continuous feeding mode will deliver the enteral nutrition at a steady rate, either until the programmed volume has
been delivered or until the supply has been exhausted. The intermittent feeding mode delivers boluses of enteral nutrition at
programmed time intervals. The bolus volume and feed rate are also programmed.
To select continuous feed mode or intermittent feed mode, press
MORE
on the opening menu, shown in Figures 5A-5B or Figures
7A-7D, to access the
MORE OPTIONS
menu, Figure 10A.
The
MORE
option is available either before a pump set has been loaded (Figures 5A-5B) or after the pump set is loaded (Figures
7A-7D). See subsection “More Options” for information on the other options in the
MORE OPTIONS
menu.
Select
CONTINUOUS/INTERMITTENT
under the
MORE OPTIONS
menu, Figure 10A. Then press
CONTINUOUS MODE
or
INTERMITTENT MODE
from the
SELECT MODE
menu, Figure 10B. Press
DONE
to exit.
Figure 10B. SELECT MODE menu
for continuous or intermittent
mode selection.
Figure 10A. MORE OPTIONS menu.
Figure 9.
EZ Mode icon
