Advanced settings
31
Home Automation
General Information
The 4GR can be used as a point of Home Automation which serves
to remotely control power switches with built-in radio receivers in
your home.
In order to get the Home Automation up and running, three things
are needed:
1. A TellStick from Telldus
Technologies plugged into a
vacant USB port in the 4GR.
2. Home automation receivers,
compatible with the TellStick.
3. Confi guration of the 4GR.
When confi guring your 4GR, start by confi guring
Automation-
>Aliases
for your devices. The uniquely named receivers (aliases) can
then be controlled by:
1. Sending an SMS containing short commands such as ”lamp1 on”.
2. Setting up a Schedule for triggering of events.
3. Manual control from the graphical user interface.
Visit the relevant pages on www.dovado.com for further information
on this section.
The 4GR can also be used to power on a computer that is connected
to one of the LAN ports on the 4GR. The computer itself has to
support the function Wake on LAN, please check the specifi cation of
your computer.
You have to confi gure an Aliases where you select the
Protocol
: Wake
on LAN and enter the MAC address of the computer connected by
LAN
Reference manual 4GR.indd Avs1:23
Reference manual 4GR.indd Avs1:23
2010-03-12 13.13
2010-03-12 13.13