background image

Missing A Part?

No Need To Go Back To

The Store!

The store where you made your purchase

does not stock parts for this item

if you need parts,

whether they are missing or damaged. 

Call Toll Free

TEL: 1-877-539-7436

FAX: 1-877-539-7439

Call us between 9:00 AM and 4:30 PM

Eastern Time Monday through Friday

The store where you made your purchase

does not stock parts for this item

if you need parts,

whether they are missing or damaged.

STOP!

Missing A Part?

No Need To Go Back To

The Store

Call us between 9:00 AM and 4:30 PM

Eastern Time Monday through Friday 

Call Toll Free

TEL: 1-877-539-7436
FAX: 1-877-539-7439

PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY 

PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU 
HAVE ALL OF THE PARTS LISTED.

SHOULD YOU NOT LOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECT ALL 

PACKING MATERIAL FOR ANY SMALL PARTS THAT MAY HAVE BECOME 

SEPARATED IN SHIPMENT.

SHOULD YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY 
PART IS MISSING OR DAMAGED, PLEASE CALL THE HELP LINE 1-877-539-7436 

BEFORE RETURNING THE ITEM TO THE STORE.
PLEASE PROVIDE THE FOLLOWING INFORMATION:
1-MODEL NUMBER OF THE PRODUCT.

2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST 

SHOWN ON ASSEMBLY INSTRUCTIONS.

MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS PRODUCT 

TO THE RETAILER.

PAGE 7 OF 7

STOP    

DON’T RETURN TO STORE!

Fig. H

Fig. H5

Fig. H1

Fig. H2

Fig. H3

Fig. H4

Step H :   
The locking mechanism can also be used to 
convert the seat assembly into a bed. 

Note:
To avoid danger of suffocation, please keep 
plastic bags or small parts away from babies 
and children. 

Cleaning and Maintenance 

• Wash frame parts and fabric with mild soap and water, rinse thoroughly. Dry frame completely and allow the 

   fabric to drip dry. 

• Do not use bleach, acid, or other solvents on the fabric or frame parts.

• In order to prolong the life and beauty of your swing, we recommend that the swing be stored in a dry area 

  when not in use. (For example, overnight or on rainy days) 

• Please inspect and tighten all bolts or fasteners on a regular basis to ensure proper performance and safety 

  of your swing. 

Special Warnings:
The user of this swing should always inspect it before each use. 
1. It is essential to place the swing on level ground and not less than 6 feet from any obstruction such as 
    fences, garages, the house, overhanging branches, laundry lines, or electrical wires. 
2. Check all bolts and nuts for tightness on a regular basis.
3. Make sure the suspension springs are always properly hooked before each use. 
4. Oil all metallic moving parts during usage season. 
5. Always remove the canopy in heavy wind conditions, otherwise the canopy may tip over and may cause 
    damage to its parts. 
6. The manufacturer will not accept responsibly for unauthorized repair or modifications to the swing. 
7. Weight limit 750 lbs. 

Summary of Contents for RUS4265-WM








Reviews: