PAGE 5 OF 7
STOP
DON’T RETURN TO STORE!
Fig. C
Fig. D
Step D - 1
Step D - 3
Step D - 4
Step D - 5
Step D - 2
Step C :
Hang the opposite ends of the suspension spring
(#16) into the holes located on the top cross beam
w/adjustable teeth (#1). Do the same procedure
for both sides.
WARNING:
Make sure that the ends of the suspension springs
(#16) go completely through the holes on the top
cross beam w/adjustable teeth (#1) and the swing
arm tubes (#11).
Step D - 1 & Step D - 2 :
Slide the canopy/frame connectors (#28) into
the side canopy braces (#13). Fasten them
together by using screws (#22) in the pre-drilled
holes. Ensure that the teeth on the canopy/frame
connectors are facing toward the inside of the
frame.
Step D - 3:
Insert the front/rear canopy braces (#12) into the
sleeves of the canopy (#32) on both sides.
Step D - 4:
Fasten the side canopy braces (#13) to the front/
rear canopy braces (#12) by using bolts (#21) on
both sides.
Step D - 5:
Velcro the canopy (#32) to the side canopy braces
(#13).
