PAGE 6 OF 7
STOP
DON’T RETURN TO STORE!
Fig. E
Fig. F
Fig. G
G-1(seat)
G-2(bed)
Step E :
Fasten the canopy/frame connectors (#28) to
the adjustable teeth on the top cross beam
w/adjustable teeth (#1) by using a plastic
screw (#29). Do this procedure for both sides.
Step F :
Place the cushions (#33) onto the seat
assembly (#10).
Double check to ensure that all of the bolts
have been completely tightened to assure
stability.
Step G :
Please make sure that the safety locks on
the seat rear support (#9) are fully locked
whenever the seat assembly is in a
swinging position. See Fig. G - 1 (seat).
To flatten the seat assembly, lift up the
safety lock and remove the support brace.
See Fig. G - 2 (bed) and Fig. H2.
Then, insert the support brace into the rear
cross brace (#5). Your seat assembly
should now be in a secured position and
not moving at all. See Fig. H3, Fig. H4,
and Fig. H5.
