COUNTERFOG SDR-F05A+, User Manual

Page: 23 / 48

COUNTERFOG® SDR-F05A+ User Manual
COUNTERFOG® EBT de la UAH S.L. 23
If any type of disinfectant has been used, follow the next procedure to dry the tank.
Remember that a correct maintenance lengthen the durability of the product.

Carefully release and open the interlocking vent valve ( Open 6 ).

Wait until pressure in the tank becomes that of atmosphere (no air flows out at
that time)

Connect the Filling hose (2) to the Inlet quick connection (3).

Open the filling valve ( Open 4 ) and check that Liquid supply valve (10) is closed .

Keep the filling hose (2) lower than the filling valve (4) and poor the remaining
liquid into a container using the filling hose (if exist). Dispose any liquid
according to the recommendations of the liquid manufacturer.

Fill up your SDR-F05A+ with drinkable water. Hold up the end of the filling
hose (2) and use the funnel (1) to fill the tank (5) with liquid
. Remember to
keep open the filling valve and the interlocking vent valve.
Always wear gloves and safety googles when filling the tank!
Do not overfill! This will damage the device.

Close the Filling valve ( Close 4 ).

Close and lock the interlocking vent valve ( Close 6 ).

Tilt the COUNTERFOG® SDR-F05A+ slightly to both sides so as to drinkable
water is being mixed with the remaining disinfectant in the walls of the pressure
tank (5).

Open the interlocking vent valve ( Open 6 ).

Open the filling valve ( Open 4 ) and check that valve 10 remain closed . Keep the
filling hose (2) lower than the filling valve (4) and poor the water into a
container using the filling hose.

Disconnect the Filling hose (2) from the Inlet quick connection (3).

Open the filling valve ( Open 4 ) and check the other valves remain closed
(6,10,16 and 17 closed) .

Plug the equipment to the 230 V supply line.

Press the ON button of the KAESER icomp3 compressor (12) ( GREEN ) and wait
for 12 minutes to remove the moisture of the pressure tank (5) through the
filling valve (4).