Cotek S1500-112, User Manual

Page: 25 / 38

8-2-2-5. To query status command
Format: STUS ?
Illustration: Don’t need to add any of parameter. To
respond the result be hexadecimal code replaced by 2
ASCII codes that is between 00 ~ FF (0~255), then convert
the Hex code to the binary digit after obtaining 8 bytes digit
that can be one of following:
“B2 ” OLP
“B4 ” OTP ( Loading > 100% / 3 min )
“B0 ” UVP ( LSB ) ( Loading > 110% )
“B1 ” OVP
“B3 ” FLP
“B5 ” BATT Too Low
“B6 ” BATT Too High
“B7 ” LOAD Too High ( MSB )
8-2-2-6. To query battery level command
Format: BATT ?
Illustration : Don’t need to add any of parameter.
To respond the result be Hexadecimal code replaced by 2
ASCII codes and is between 00 ~ 0B, then convert into
decade digit after obtaining a digit, between 0~11, that
can be one of following:
Hex
code
Decade
code
Indication
00 0 LED 1 glows blinking to indicate low
voltage
01 1 LED 1 glows solid.
02 2 LED 2 glows solid.
03 3 LED 3 glows solid.
04 4 LED 4 glows solid.
05 5 LED 5 glows solid.
06 6 LED 6 glows solid.
07 7 LED 7 glows solid.
08 8 LED 8 glows solid.
09 9 LED 9 glows solid.
0A 10 LED 10 glows solid.
0B 11 LED 11 glows blinking to indicate over
voltage
24