Cotek S1500-112, User Manual

Page: 20 / 38

No output voltage. Thermal shutdown Improve ventilation,
Over Temp indicator Make sure ventilation
on, load less than openings in inverter
1500W. are not obstructed.
Reduce ambient
temperature.
No output voltage, Short circuit or Wiring Check AC wiring
Over Load indicator error. for short circuit or
On. improper polarity (hot
and neutral reversed).
Very high power load Remove load
5. Maintenance:
Very little maintenance is required to keep your inverter operating properly.
You should clean the exterior of the unit periodically with a damp cloth to
prevent accumulation of dust and dirt. At the same time, tighten the screws
on the DC input terminals.
6. Warranty:
We warrant this product against defects in materials and workmanship for a
period of 24 months from the date of purchase and will repair or replace any
defective power inverter when directly returned, postage paid, to us.
This warranty will be considered void if the unit has suffered any obvious
physical damage or alteration either internally or externally and does not
cover damage arising from improper use such as plugging, the unit into an
unsuitable power sources attempts to operate products with excessive power
consumption requirements, or use in unsuitable environments.
This is the only warranty that the company makes.
No other warranties express or imply including warranties of merchantability
and fitness for a particular purpose.
Repair and replacement are your sole remedies and the company shall not be
liable for damages, whether direct, incidental, special or consequential, even
though caused by negligence or other fault.
19