8
EN
GL
IS
H
4B
1
17
2B
18
2B
11
3. Assembly and setup
Warning:
Unplug the jigsaw from the electrical socket before carrying out any
adjustment, servicing or maintenance.
3.1 Changing the blade
1. Undo the blade holder lock (4B)
by lifting it up towards the handle.
Remove the used blade.
2. Insert the new blade (1) as far up
into the blade holder (4) as it will go.
Check that the back of the blade runs
along the guide roller (17).
3. Release the blade holder lock.
4. Check that the blade is held securely by
trying to pull it.
Note:
The saw blade will be locked as soon
as the blade holder lock is released.
3.2 Fitting the edge guide
1. Undo the two set screws (2B) but
do not remove them. Use the Allen
key (11) which is kept in a holder on
the power lead.
2. Slide the edge guide (18) into the slots
(2) on the soleplate.
3. Set the desired length.
4. Tighten the set screws.
5. Check that the saw is set correctly by
test-cutting a piece of scrap wood/
metal before sawing the workpiece.
Adjust the edge guide if necessary.
