3.3 Use of lock sockets
3.4 Connecting the pump to the pool
Tips:
1) How to use the safety valve.
◎
Open the cap of valve;
◎
Insert the inflatable hose into the inlet to inflate and insert the cap of the
valve when the inflation is complete;
see Figure 5
◎
Deflation: open the cap of valve and let the air out slowly from the
chamber.
Note:
The power plug must be pull out before connecting the pump to the
pool.
◎
Connect the pump and pool by pipes according to the marks on outside
surface,
see figure 9
◎
Assembling the filter cartridge
The filter cartridge is screwed to the water inlet wall of the pool and rotated
clockwise.
See figure 10
◎
Fill the pool with water
Fill the water with water hose until the water reaches the printed water level
line on the inner wall of the pool.
Warning:
◎
Do not plug in during filling the water.Take care of the water hose to
prevent them from falling off to cause the water leakage.
◎
Please cover the pool well when you heat the water.
◎
Please make sure that the children use the pool under the supervision of
adults.
◎
When not in use, please cover the pool and lock the buckle to prevent
children from entering the pool.
Insert the key into the hole in the middle of the socket and open or lock it in
the direction of the switch shown in
figure 8
2) How to use a rotated valve
◎
Open the cap of valve;Press the red point on the up position.
◎
Insert the inflatable hose into the air inlet and rotate it in place clockwise,
and cover the cap when the inflation is complete;
see Figure 6
◎
Deflation: open the cap of valve, press the middle red point on the down
position, let the air slowly out from the chamber.
6
5
7
8
9
10
Water line
Max
Min
A)
B)
C)
10
11