3
TEST
pH value
Cyanuric acid
Free chlorine
Chlorine compound
Algae
Calcium hardness
IDEAL VALUES
7.4 – 7.6
30 – 50 ppm
2 – 4 ppm
0
None visible
200 – 400 ppm
IMPORTANT:
Don't use granulate tablets or throw the tablet directly in the water. The chemicals can deposit on the bottom, damage
the material and discolor the PVC.
Using chemical liquid (not included):
IMPORTANT:
Add chemical liquid in small doses and in the center of the pool to avoid direct contact between the chemicals and the
PVC surface. Direct contact can damage the material and discolor the surface.
NOTE:
Remove the chemical dispenser from pool when the pool is in use.
IMPORTANT:
After performing chemical maintenance and before using the pool, use a
test kit (not included) to test the water chemistry. We recommend maintaining your water according to
the following table.
NOTE:
Damage resulting from chemical imbalance is not covered by the warranty. Pool
chemicals are potentially toxic and should be handled with care. There are serious health risks from chemical vapors and the incorrect labeling and
storage of chemical containers. Please consult your local pool supply retailer for more information about chemical maintenance. Pay close
attention to the chemical manufacturer's instructions. Pool damage resulting from misuse of chemicals and mismanagement of pool water is not
covered by the warranty.
IMPORTANT:
Over usage of chemicals can discolor the printing and all points of the pool material. It can also damage the structure of
the pool liner.
To keep your pool clean:
1. Contact your local pool supply shop for advice and purchase of chemicals and pH kits. One of the most important factors to increase the life of
the liner is to keep continuously clean and healthy water. Please strictly follow the instructions from professional technicians for the water
treatment through the use of chemicals.
2. Locate a bucket of water next to pool to clean users’ feet before entering pool.
3. Cover the pool when not in use.
4. Skim pool regularly to avoid settled dirt.
5. Check and wash the filter cartridge regularly.
6. Gently clean any scum from below the top ring with a clean cloth.
7. Please be careful in case of rain water, kindly check that the water level is not higher than the expected. If so, YOU HAVE TO DISCHARGE THE
EXCESS WATER.
8. If it rains, check that the water level is not higher than the specified level. If water exceeds the specified levels, drain the pool to the specified
level.
Proper maintenance can maximize the life of your pool.
During the season of use of the swimming pool, the filtration system must be necessarily put into service every day, enough time to assure at least
a complete renewal of the volume of water.
NOTE:
The pump is used to circulate the water and to filter small particles. In order to keep your pool water clean and hygienic, you must
also add chemicals.
Cleaning and Storage
1. After deflation, use a damp cloth to gently clean all surfaces.
Note:
Never use solvents or other chemicals that may damage the product.
2. Remove all the accessories and spare parts of the pool and store them clean and dry.
3. Once pool is completely dry, sprinkle with talcum powder to prevent pool from sticking together, fold pool carefully. If pool is not completely dry,
mould may result and will damage the pool liner.
4. Store liner and accessories in a cool, dry place out of children’s reach, with a moderate temperature between 5°C / 41°F and 38°C / 100°F.
5. During the rainy season, pool and accessories should be stored as instructed above.
6. Unproper draining of the pool might cause serious personal injury and/or damage to personal property.
7. Check the product for damage at the beginning of each season and at regular intervals when in use.
