7
Configure basic network camera settings and all other
system settings.
Screen images may vary depending on the model.
Camera Protocol
Camera supports
DirectIP™
and
iNEX
protocols.
•
DirectIP™
protocol:
- Using with a DirectIP™ NVR enables camera use
without the need to configure network settings.
- The DirectIP™ NVR also allows you to control all
camera settings directly from the NVR, without the
need for a computer.
For more information on configuring camera
settings from a DirectIP™ NVR, refer to the DirectIP™'s
operation manual
.
•
iNEX
protocol:
- Control the camera over the network from software
installed on a computer or a separate NVR.
- Ideal for using the camera over the network from a
remote location.
Switching Protocols
1
Launch the INIT program and from the list, select a
camera whose protocol you wish to change.
2
Click on the
Setup
icon and then select
Setup
→
Protocol Setup
.
• Alternatively, you can right-click on the mouse and
select
Protocol Setup
.
3
From the
Protocol Setup
screen, select the desired
protocol and then click
OK
.
4
This will activate the selected protocol. You can
check each camera’s protocol on the INIT program.
This user manual was written based on the iNEX
protocol.
Part 1 - Remote Setup
Summary of Contents for CDI125360V
Page 1: ...Network Camera Operation Manual ...
Page 49: ......
