background image

Before reading this manual

4

FCC Compliance Statement

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 
15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE 
WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE 
RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE 
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO 
CAUSE HARMFUL INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.

WARNING

: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID 

THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE 
CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS.

WEEE (Waste Electrical & Electronic Equipment)

Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household 
wastes at the end of its working life.  To prevent possible harm to the environment or human health from 
uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote 
the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government 
office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This 
product should not be mixed with other commercial wastes for disposal.

This product contains software built partially on open-source content. You may obtain the complete 

corresponding source code depending on whether or not the source is publicly available under a license policy. 

For more information, refer to 

System > General

 page. This product includes software developed by the University 

of California, Berkeley and its contributors, and software developed by the OpenSSL Project for use in the OpenSSL 

Toolkit (http://www.openssl.org/). Also, this product includes cryptographic software written by Eric Young (eay@

cryptsoft.com).

Summary of Contents for CDI125360V


















































Reviews: