Costar CDI125360V Page 42 Operation Manual Download

Page: 42 / 49

Part 2 - WebGuard

Image Adjustment:

Click to adjust the brightness, contrast, saturation and hue of monitored image.

PTZ Control:

This function is not supported.

•

Alarm-Out Control:

Click to control an alarm out device remotely.

Setup:

Click to set up the image drawing mode and OSD display. You can adjust the display speed by

changing the image drawing mode, and select OSD information to be displayed on the screen.

Save Image:

Click to save the current image as a bitmap or JPEG file format.

Remote Setup:

Click to change the settings of the camera by using the Remote Setup screen.

Event Status Window:

The event status window at the bottom displays a list of events that were

detected in the camera.

Enable/Disable Alarm In

Tampering

Motion Detection

Audio Detection

Trip zone

Summary of Contents for CDI125360V


















































Search results

Summary of Contents for CDI125360V

Reviews:

Related manuals for CDI125360V

Brands by name

Popular brands

Costar CDI125360V, Operation Manual

Search results

Summary of Contents for CDI125360V

Reviews:

Related manuals for CDI125360V

Brands by name

Popular brands