Costar CDI125360V, Operation Manual

Page: 11 / 49

Part 1 - Remote Setup
11
User/Group
• User/Group : Change remote camera control
permission settings for users and user groups.
- Add Group : Add a new user group. Designate
a name for the group and then specify control
authorities.
- Add User : Add a new user. Designate a name for
the user, select which group to add the user to, and
then enter a connection password.
- Edit : Edit group authorities and/or user passwords.
Select a group or user and then click on the button.
-
Remove
: Delete groups or users. Select a group
of user you wish to delete and then click on the
button.
•
Allow Anonymous Login
: Select if you are using
Webcasting. For more information on webcasting,
refer to the
Webcasting on page 24 .
• User/Group settings can only be configured by
users belonging to the
Administrator
group.
• There is no default password for the
Administrator
group's admin user.
• Standard groups (
Administrator
,
Operator
, and
User ) cannot be edited or deleted. Authorities
assigned here apply identically to ONVIF protocol
user groups.
• Group authorities that can be assigned are as
follows:
–
Upgrade
: Upgrade the system.
–
Setup
: Configure the system's settings.
– Color Control : Adjust the camera's brightness,
contrast, saturation, and hue settings.
–
Alarm-Out Control
: Reset alarm outs.
–
Search
: Search video recordings saved on the SD
memory card from a remote program.
– Clip-Copy : Search video recordings saved on the
SD memory card and save them as video files
from a remote program.