![background image](http://html1.mh-extra.com/html/costan/valzer-next/valzer-next_user-instructions_2671013026.webp)
Modello - Modèle - Model
Modell - Modelo
VALZER NEXT
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
26/76
N° DOC
UM000392
22. ELECTRONIC CONTROL UNIT OPTIONAL
21. MEANING OF THE LEDS
LED
MODE
MEANING
ON
Active compressor
Flashing
Delay against close starts
ON
Defrosting in progress
Flashing
Dripping in progress
ON
Fans on
Flashing
Fans start delay in progress
ON
A temperature alarm activated
ON
Continuous cycle in progress
LED
MODE
MEANING
ON
Light on
ON
Auxiliary active
ON
Unit of measurement
Flashing
Programming
ECO
ON
Energy saving in corso
°C
This temperature adjuster is gauged by the factory and should not be touched by the user.
To replace the temperature/setpoint, proceed as follows: press the
Enter
key while the writing
PArA
is on the display, you
can access the parameters menu.
Pressing the
UP
or
DOWN
keys, you scroll through the parameter items up to item
P-01
; then select item
P-01
with the
Enter
key.
Press the
UP
or
DOWN
keys to change the value of the temperature/setpoint and press
Enter
again to save the value. The list
of parameters will be proposed again; to exit the menu, scroll the items to the
ESC
item and press
Enter
.
1. Enter
(to confirm menu items)
2.
Defrost
(manual defrosting)
3.
UP button
(scrolls the menu items)
4. DOWN button
(scrolls the menu items)
1
2
3
4
LED
MEANING
Compressor on
Motor-driven fan on
Internal lighting on
Defrosting in progress
Connection to mains on
LED
MEANING
Request support
Temperature alarm
Presence alarms list
23. PROLONGED SWITCH OFF
When the unit is not used for a long time, please take note of the following procedures:
• Unplug the unit.
• Clean and dry the tank well.
• Leave the glass door open to avoid possible formation of bad odours.
• Cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.