− 18 −
Error Message
4. Error Messages (Malfunction Alarm)
4. Error Messages (Malfunction Alarm)
An error alarm sounds when an error occurs, i.e., the LCD screen displays a corresponding error
message and a buzzer sounds. The following table shows the main error messages. Take the necessary
remedy according to the error message.
Error message
Remedy
If the same error message appears again after the Gas
Detector is turned OFF and ON several times in a clean
air, a sensor error or the end of the sensor lifetime may
be considered. Contact your New-Cosmos Electric
representative for repairs.
This message appears when the battery voltage drops
and the remaining battery level is low. The Gas Detector
will not work when the battery voltage is low. Replace
the batteries (see pages 20). Use approved batteries
Duracell MN1500, Panasonic LR6XJK or Toshiba LR6.
The gas sampling hose may have been broken or sucked
in water or the suction tip may be clogged. Take the
necessary measures, such as eliminating the water (see
page 19). If the same error message appears again after
the Gas Detector is turned OFF and ON several times,
the pump may be broken. If the pump cannot be reset
after resetting the batteries or water is drawn into the gas
sampling hose or the Gas Detector, contact your New-
Cosmos Electric representative for repairs.
The Gas Detector may be malfunctioning. Contact your
New-Cosmos Electric representative for repairs.
Summary of Contents for XP-3110
Page 30: ...MEMO...
Page 31: ......
