5
5.1 - Selecting the operating modes
Using key K1, with the remote control positioned in any operating mode, it is possible to select, by rotation, the
possible operating modes of the boiler, such as:
· OFF
· domestic hot water and heating
· only domestic hot water
· only heating
OFF
Only the room anti-freeze function with temperature setting equal to 5°C is enabled in this mode. The display
shows:
· current day, hour and minutes
· the value of the room temperature gauged
· the switched off symbol and the wording OFF
Domestic hot water and heating
The domestic hot water and heating functions are enabled in this mode. The display shows:
· current day, hour and minutes
· the value of the room temperature
· the tap symbol and the radiator symbol
· the timer bar (if related function enabled)
Only domestic hot water
The heating function is disabled and the functions relating to the domestic hot water are enabled in this operating
mode.
The display shows:
· current day, hour and minutes
· the value of the room temperature
· the tap symbol
· the timer bar (if related function enabled)
Only heating
The domestic hot water function is disabled and the functions relating to the heating are enabled in this operating
mode.
The display shows:
· current day, hour and minutes
· the value of the room temperature
· the radiator symbol
· the timer bar (if related function enabled)
5.2 - Automatic or manual operation of the time programmable thermostat
Using key K2, it is possible to enable or disable the time-programmable thermostat of the remote control in
cyclical mode. This can be noted from the display of the histogram bar of the time-programmable thermostat
(automatic position), alternatively from the display of the hand (manual position)
The function only becomes available in the “heating with domestic hot water” and “only heating” modes. The
function is not active in the “only domestic hot water” mode.
Consult section 5.8 for the programming of the time-programmable thermostat .
When the remote time control is in the MANUAL position (hand designed on the display), just use the K+ o K- keys
for increasing or decreasing the temperature required.
