7
- follow the setting of the timing programme of the heating service
The activation of the AUTO domestic hot water mode is indicated on the display when the clock
symbol lights up.
It is possible to interrupt the function in question at any given moment, re-setting the continual function
(always ON) of the domestic hot water mode. In order to do so, after having selected the domestic hot
water mode SAN – AUTO (key KM followed by key K2), press key K1 (ON); the remote control
automatically returns to the operating mode.
By pressing key K4 (TIMER), the TIMER domestic hot water operating mode is enabled; in practice, the operating
of the domestic hot water mode is forced for a given period of time.
The display shows the DURATION parameter which can be selected by using key K1 (DURATION);
the flashing off said parameter indicates its selection and the possibility of changing it using the keys
K+ o K-.
The DURATION parameter can adopt a value ranging between 30 minutes and 12 hours.
Return to the operating mode takes place automatically, after 2 minutes, or manually using the KM
key.
The activation of the TIMER domestic hot water mode is indicated on the display when the TIMER
SAN wording lights up, or, in the event that the heating timer function is also active, the TIMERS
wording is shown.
Once the timing has elapsed, the domestic hot water mode returns to that active before the setting of
the TIMER domestic hot water mode.
It is possible to interrupt the function in question at any given moment. In order to do so, after having
selected the domestic hot water mode SAN – TIMER (key KM followed by key K2), press key K1
(OFF); the remote control automatically returns to the operating mode
5.7 - System parameters’ consultation
Using key K3, with the remote time control positioned in any operating mode (excluding OFF mode), it is possible
to immediately access the user information.
Having pressed key K3, the display will immediately show the external temperature; using keys K1 (<<) and K4
(>>), it is possible to display the subsequent information, listed below:
· TMP ESTERNA
external temperature
· PRESSIONE
data not available
· TMP MANDATA
boiler unit temperature
· BRUCIATORE
data not available
· TMP SAN
domestic hot water temperature (only with water heater)
· PORTATA SAN
data not available
· STATO SAN
domestic hot water mode status, 0 inactive 1 active
· TMP RITORNO
data not available
· TMP AMBIENT
room temperature
Return to the operating mode takes place automatically, after 2 minutes, or manually using the KM key.