9
2 - COSMOBIT-GATEWAY CONNECTION AND CONFIGURATION OF INTERNET
CONNECTION
Connect the gateway to the power supply.
During startup the LEDs will light up red.
The connection between the gateway and Cosmobit will be
established automatically and the LEDs will all turn green,
except for the one with the “internet connection” symbol (the
first on the left). Attention if the central LED remains red, this
means that the gateway has not connected to the Cosmobit.
First make sure that the distance is not excessive. In case of
persistence of the red led even at short distances proceed
with a new binding between the 2 devices (see chapter 5).
Connect the Ethernet cable from the Gateway to an internet
router.
The gateway will automatically connect to the internet via the
modem-router. When the internet connection is established,
the internet connection symbol will change from red to
blinking green.
If the connection between Cosmobit and gateway has been
successful, it can also be seen from the Cosmobit which on
the display will show the following symbol.
COSMOBIT
