12
5 - USE
After the first start-up and during use, the thermostat shows
the room temperature, the internet connection status (top right
icon) and if the thermostat is on heating call or not (stylized
flame on the left of the display).
5.1 Desired Environment Temperature (setpoint temperatures)
To adjust the desired room temperature (or setpoint) simply turn
the thermostat outer ring. The thermostat will try to keep the
set temperature as accurately as possible. Rotate the ring in a
clockwise direction to increase the setpoint or anticlockwise to
decrease it. After 5 sec. The measured temperature appears
again on the screen.
NOTE: If a schedule of time bands has been previously set
via smartphone or tablet, manual modification of the desired
temperature will take effect up to the time change determined
by the aforementioned programming.
5.2 Limitation of setpoint temperatures
Basic Cosmobit can set the setpoint temperature in a range between 5 ° C and 35 ° C.
If you want to limit this adjustment range, proceed as follows:
NOTE: the setpoint temperature limitation, as set on Cosmobit, has priority to the settings from the App.
Turn the adjustment ring counterclockwise until 5 ° C appears.
Then press the button hidden just below the display for 10
seconds as shown in the figure.
The maximum value of 35 ° C appears. Using the adjustment
ring, bring this value to the maximum desired value. It is not
necessary to confirm the operation. This will be the maximum
settable temperature.
Press the right button again to access the minimum value.
Also bring this to the desired value. This will be the minimum
settable temperature.
1
2
1. - Direction of rotation to lower the temperature;
2. - Direction of rotation to raise the temperature;
COSMOBIT
