IT VERSION
If the machine’s version is with IT set, there is an inflating pedal on the left side of the machine.
When the pedal is pushed down to its middle position, air is released from the airline gauge.
When the pedal is pushed down completely, air is released from the inflation gauge along with
powerful jet from the nozzles on the turntable clamps.
Assembly of air tank and tools box:
Fig.IT1
1) Place the air tank (15,Fig.IT1) on the body (9,Fig.IT1) of the tire changer and fix the air tank
with nuts (13,Fig.IT1)
2) Insert the rubber hose (10,Fig.IT1) from of the body to the connection (12,Fig.IT1) of the air
tank.
3) Fix the hose to the connection by tightening the hose clamp (11,Fig.IT1).
4) Unscrew the screws (03,Fig.IT1) of the front panel of the tools box (01,Fig.IT1).
5) Fix the tools box and its support frame (08,Fig.IT1) with screws and nuts in the pre-drilled
holes.
6) Connect hose (05,Fig.IT1) from the body to the fitting (02,Fig.IT1) of the manometer
(04,Fig.IT1) through the holes of the tools box.
7) Replace the front panel of the tools box and fasten with its screws.
-1 General information
1) The IT inflating device is used during bead-seating operation and
during inflation in place of the airline gauge.
2) NOTE: Before any installation work, check to make sure that the
tire changer is disconnected from any power sources.
3) Before operating it should be to check the device correctly: Fig.IT2
-Press the inflating pedal, which is stretched out from the bottom of the left cover of the box
assembly, down to the middle position (Fig.IT2, position1). The inflating head should give air.
-Press the inflating pedal all the way down (Fig.IT2, position 2). A strong air blast should
come from the holes in the four locking slides.
Summary of Contents for C211 C
