Cosen V2026NC, Instruction Manual

Page: 51 / 142

4 ‐ 17
STANDARD ACCESSORIES
Blade tension device

This blade tension device equipped with hydraulic cylinder
provides appropriate tension to the saw blade.

To tighten the saw blade, turn the selector to .

Upon saw blade breakage, the safety device will activate and
automatically stop all machine operation.

The limit switch of the safety device can be reset by turning the
blade tension selector to .

To change the blade, turn the handle to to release saw
blade tension.
Blade speed/motion detector

Besides detecting the blade speed, the speed/motion detector
also functions as a safety device.

The speed/motion detector protects operators and the
machine by preventing blade overloads and consequent
damages if a saw blade breaks or skids.

Once blade breakage or slippage is detected, the drive wheel
will stop in 10 seconds.
Inverter
This inverter is installed inside the machine base. It is used to control
and stabilize the saw blade speed during cutting.
To adjust blade speed, use the blade speed control knob on the
control panel.
Note:
1. Make sure the terminal points are connected.
2. Make sure the ambient temperature is within acceptable range
and keep the surroundings well ventilated.
3. Keep the inverter away from dust.
4. For repair or maintenance, please contact your local agent.