Cosen V2026NC, Instruction Manual

Page: 44 / 142

4 ‐ 10
No Item Function Description
1
Hydraulic start
When the power is turned on, press this button to
start the hydraulic motor.
A solid yellow icon indicates the hydraulic system has
been turned on.
2
Hydraulic stop Press this button to turn off the hydraulic motor
immediately.
When the blade is running, the hydraulic stop
button is temporarily disabled. You need to press the
saw blade stop or the saw bow backward button to
stop the blade first.
3
Saw blade start When the work piece is clamped properly, press this
button to start cutting.
A solid yellow blade icon indicates the blade has been
started.
When the blade is running, all the buttons are
temporarily disabled except the emergency stop
button, saw bow backward button, blade speed
control knob, and saw bow feeding speed control
knob. When cutting is finished, all the control
buttons resume function.
4
Saw blade stop Press this icon to stop the saw blade.
5
Work light ON/OFF
Press this button to turn on the work light.
A solid yellow light bulb icon indicates the lamp has
been turned on.
Press again to turn the light off.
6
Coolant ON/OFF
Press this button to turn on the coolant pump.
A solid yellow faucet icon indicates the coolant pump
has been turned on.
Press again to turn off the coolant pump.
7
Last cut function
ON/OFF
When the mode is selected, the blade will
automatically stop and the hydraulic system will shut
down (in 10 seconds) after the current cut is finished.
8
Left vise lock/unlock Press this button to lock/unlock left vise.
Lock the left vise and vise clamping light must be on,
otherwise blade will not start cutting.