Cosen V2026NC, Instruction Manual

Page: 40 / 142

4 ‐ 6
10. Saw bow angle control knob

When the knob is turned to the left, saw bow inclines to the left. When saw bow reaches 150°
and touches the left limit switch, saw bow left limit switch red light on HMI touch screen is
triggered and saw bow stops.

When the knob is turned to the right, saw bow inclines to the right. When saw bow reaches 30°
and touches the right limit switch, saw bow right limit switch red light on HMI touch screen is
triggered and saw bow stops.
Return ‐ to ‐ zero point of angle encoder is installed at 150°. Angle can be adjusted in HMI (angle
margin of error: 0.2°). Refer to below figure for the definition of angle.