9
If you will be using the lowest
shoulder harness slots as shown,
you
MUST
rethread the harness
system.
5.
Attach Harness
Strap Loops to
Splitter Plate
Sewn ends of the
harness strap loops
MUST
face towards
you.
sewn
end
DO NOT
twist harness strap or harness
adjustment strap.
Make sure the harness strap loops are
fitted
COMPLETELY ON
both sides of
the
splitter plate.
To remove harness strap
, see pages
14-15.
To install harness strap
, see pages
17-19.
WARNINGS:
Make sure the harness height is correct for your
child’s size.
Do not use this child restraint rear facing unless the top of
your child’s head is at least 1 in. (2.5 cm) below the top of
the child restraint.
Do not use this child restraint forward facing if the tops of
your child’s ears are above the top of the child restraint.
Failure to follow these steps can result in serious injury or death.
10
4358-6590B Scenera NEXT.indd 15-16
4358-6590B Scenera NEXT.indd 15-16
5/6/15 3:25 PM
5/6/15 3:25 PM
