How Does Your Child Fit?
Prepare Child Restraint to Fit Your Child
3
4
1.
Fully Loosen
Harness Strap
Push down on harness
release lever (under
flap on front of seat
pad) while pulling out
on harness strap as
shown.
3.
Release Chest
Clip
Press on chest clip
release button and
pull apart. Place
harness strap out of
the way.
2.
Unbuckle
Harness
Press in towards the
top
of the red button.
Pull buckle tongues
out.
REAR FACING
FORWARD FACING
Start in the 1st slot and
adjust outward as your child
grows. Buckle should be
used in the slot closest to
your child but not under-
neath or behind your child. 1st or 2nd slot
MUST
be used.
Always choose the shoulder
harness slot closest to your
child’s shoulder height.
Harness strap
MUST
be
at
or slightly below
shoulders.
If the lowest shoulder harness slots are
above the child’s shoulders,
do not
use
this child restraint.
Start in the 1st slot and
adjust outward as your child
grows. Buckle should be
used in the slot closest to
your child but not underneath
or behind your child. Any slot can be used.
Always choose the shoulder
harness slot closest to your
child’s shoulder height.
Harness strap
MUST
be
at
or slightly above
shoulders.
If the highest shoulder harness slots are
below the child’s shoulders,
do not
use
this child restraint.
To change the buckle position
, see pages 5-6.
To change harness strap position
, see pages 8-10.
Use the guidelines below to determine if the buckle and harness strap are in the right
place for your child.
1
2
1
2
3
4.
Place Child in
Child Restraint to
Determine Proper
Harness Fit
The child’s bottom
and back should be
flat against the child
restraint.
See page 4 for fit guidelines.
4358-6590B Scenera NEXT.indd 9-10
4358-6590B Scenera NEXT.indd 9-10
5/6/15 3:25 PM
5/6/15 3:25 PM
